Protective Liquid Glass Nano Coating
This is an invisible protection for mobile phones, tablets, laptops & PC’s.
The Hydrophobic coating repels dirt and liquids.
The coverage area is up to 1m squared.
After Bioarmor arrived I was very excited to give it a try as the videos i have seen were fantastic. I read through all the instructions which were very easy to follow i have to say. So after opening the box I have a few smaller items inside. There was the Pre-clean Surface Wipe & the Bioarmor Nano Coating plus a small microfiber. I chose my sons Ipad for this experiment as he is only a little boy and lets just say he create a lot of mess with food as well as liquids.
So step 1, now I did give it a little wipe before as there was some dried food which may have been a little tough for the wipe included in the pack, but this is up to you. So using the Pre-clean wipe I made sure I gave it a full clean all around the edges for a good minute or two.
Step 2 the Bioarmor-Nano, After you have made sure your Ipad or phone or which ever you choose to use is fully clean then go for the Bioarmor-Nano Coating. Make sure you apply this nice and even all the way around making sure not to miss any bits as you do not want some dirt or liquid getting passed. Also don’t forget them edges. There will be plenty of the Bioarmor to cover quite a few gadgets so don’t be afraid to go at as many as you can. Once covered completely and you are happy with them then stage 3.
Step 3, So after stage 2 you will have to sit about for 5 minutes to allow for the Bioarmor agent to evaporate so put kettle on and make a brew. After you have you brew the agent should be dry at this point so go ahead and grab the microfiber provided and give it a going over to get rid of any excess left behind.
Step 4 the Final Step, So once you are happy with the excess removed you may as well go for a nap as this is the long part. 5 hours and counting. I would generally start the process a bit of time before you hit the hay so its can dry over night.
You might notice the product may be dry prior to the 5 hours, this is OK for it to be used at this point but please DO NOT use any cleaning products on the gadget until it has at least a full 5 hours to dry. After which you can use what ever you want, the worlds your oyster.
The following morning I open my eyes and first thing i do is pick the Ipad up. I took it down and had to give it a test so i did……I poured some water on the Ipad and low and behold it works a treat 🙂 I would happily recommend this products to anyone, works so well and can’t wait to try Bioarmor’s next product :).
Fantastic idea by Bioarmor-Nano
Thanks guys 🙂
Link to buy